Playcore Swing-N-Slide PB 8288 Instrucciones De Montaje página 21

5-1/2'' Hex Head Bolt
2-1/2'' screw
A-Frame Assembly cont.
1. Attach A-Frame beam to Swing Beam using (1) 5-1/2'' hex bolt, (1) washer and (2) screws as shown
in (Fig. 13).
2. Repeat on other bracket. Tighten both hex bolts to flush with top of T-nuts.
T-nut
2-1/2'' screws
5-1/2'' Hex Head Bolt
21
ssembly Instructions
Fig. 13
Washer