Harman JBL CSA-2120 Operación Manual página 11

Figure 2.6 Wiring Audio System
Professional
audio system
Personal audio
system
2.6 Wiring Your Audio System
Typical input and output wirings are shown in Figure 2.6.
INPUTS: Connect input wiring for both channels using either the RCA or the
Euroblock input for each channel.
OUTPUTS: Maintain proper polarity (+/–) on output connectors.
Connect Channel 1 loudspeaker's positive (+) lead to Channel 1 positive (+) terminal
of amp; repeat for negative (–). Repeat Channel 2 wiring as for Channel 1.
The minimum impedance one of the amplifier channels can drive is 4 Ohms.
Therefore, you can connect up to four 16 Ohms speakers, or two 8 Ohms speakers,
or one 4 Ohms speaker to each amp channel.
11