Harman JBL CSA-2120 Operación Manual página 7

Figure 2.2.1 Dimensions
Figure 2.2.2 Mounting Kit
Figure 2.2.3 Rack mounting an amplifier and CST-2120 Transformer Module
Solution A: Rack Mounting an Amplifier and CST-2120 Transformer Module
To install an amplifier and a CST-2120 transformer module in your cabinet system,
refer to Figure 2.2.3 and follow the steps below:
1. Align two modules side by side, with the front panel towards the same direction.
2. Connect them with the flat bracket.
3. Attach an angle bracket to each side of the amplifier assembly with screws.
4. Install the amplifier assembly into the cabinet. For details of installation in the
chassis of the cabinet, refer to the user guide of your cabinet.
long angle bracket
flat bracket
angle bracket
Unit: mm [inches]
7