Descargar Imprimir esta página

Yamaha PDX-31 Manual De Instrucciones página 2

Ocultar thumbs Ver también para PDX-31:

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
1
Install this unit in a well ventilated, cool, dry, clean place
- away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold. (Do not use/keep this unit in a car
etc.)
2
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
3
Do not expose this unit to sudden temperature changes
from cold to hot, and do not locate this unit in an
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this unit, which
may cause an electrical shock, fire, damage to this unit,
and/or personal injury.
4
Avoid installing this unit where foreign objects may fall
onto this unit and/or this unit may be exposed to liquid
dripping or splashing. On the top of this unit, do NOT
place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
5
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire, damage
to this unit, and/or personal injury.
6
Do not operate this unit upside-down. They may overheat,
possibly causing damage.
7
Do not use force on switches, knobs, and/or cords.
8
When disconnecting the power cable from the wall outlet,
grasp the AC plug; do not pull the cord.
9
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
10
Only the voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. Yamaha will not be held responsible for any
damage resulting from use of this unit with a voltage other
than that specified.
11
Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reason.
12
When not planning to use this unit for long periods of time
(i.e. when going on vacation), disconnect the power cable
from the AC wall outlet.
13
Be sure to read the "TROUBLESHOOTING" section
regarding common operating errors before concluding that
the unit is faulty.
14
Before moving this unit, disconnect the power cable from
the wall outlet.
15
Be sure to use the AC adaptor supplied with this unit.
Using an AC adaptor other than the one provided may
cause fire or damage to this unit.
16
Install this unit near the wall outlet and where the power
cable can be reached easily.
17
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage to the product due to lightning and power-
line surges.
18
The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like. When you dispose of batteries,
follow your regional regulations.
There is a chance that placing this unit too close to a
CRT-based (Braun tube) TV set might impair picture color.
Should this happen, move this unit away from the TV set.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
Even if an iPhone or iPod is not connected to this unit, this
unit is not disconnected from the AC power source as long
as it is connected to the wall outlet. In this state, this unit is
designed to consume a very small quantity of power.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
i
En

Publicidad

loading