Descargar Imprimir esta página

Yamaha PDX-31 Manual De Instrucciones página 5

Ocultar thumbs Ver también para PDX-31:

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROLS AND OPERATIONS
Status Indicators (LEDs)
Indicate the status of the unit and a connected iPhone/iPod. The status of a connected external device is not indicated.
Green status indicator: The unit is turned on and operating normally.
Red status indicator: An error has occurred or the volume has reached its maximum or minimum level.
LED
Green
Red
Once
Continuously
Once
Once
Once
2 sec.
Continuously
Continuously
...Lit
...Flashing
The operations that can be controlled for the connected iPhone/iPod and external device are indicated by
available).
Connected device
Operated device
The Unit
iPhone/iPod
External Device
Remote Control
*3
When an iPhone/iPod and external device are connected and playing at the same time, the volume levels of both the iPhone/
*1
iPod and external device will be adjusted.
To adjust the volume level of the external device independently when an iPhone/iPod and external device are connected and
*2
playing at the same time, adjust the volume level at the external device.
*3
For information about using the remote control, refer to the Quick Manual.
3
En
An iPhone/iPod is connected.
The volume level has been adjusted using the iPhone/iPod or unit's volume keys, or a
signal has been received from the remote control.
Connection in progress, please wait.
30 seconds have passed since the iPhone/iPod was paused.
The unit's volume has reached the maximum or minimum level when an iPhone/iPod is
connected to the iPod Dock.
The unit's volume has reached the maximum or minimum level when an external device is
connected to AUX.
The connected iPod is not supported.
Refer to "TROUBLESHOOTING" for the proper remedy.
Connection failed.
Refer to "TROUBLESHOOTING" for the proper remedy.
An error occurred and the unit's protection circuitry has been activated.
Refer to "TROUBLESHOOTING" for the proper remedy.
...Off
AVAILABLE OPERATIONS
iPhone/iPod
Volume Control
Other Operations
*1
*1
*1
Status
External Device
Volume Control
*1
*1
*2
*1
(available) or
(not
Other Operations

Publicidad

loading