Publicidad
Idiomas disponibles
Idiomas disponibles
The device is part of the Parkside
X 20 V TEAM series and can be oper-
ated using Parkside X 20 V TEAM series
batteries. The batteries may only be
charged using chargers from the Parkside
X 20 V TEAM series.
General description
An illustration of the most im-
portant functional components
can be found on the fold-out
page.
Scope of delivery
Carefully remove the tool from the packag-
ing and check that the following parts are
complete:
-
Device
-
Ignition key
-
Cleaning spatula
-
Instruction manual
The rechargeable battery and
charger are not included in
delivery!
Dispose of the packaging material
properly.
Overview
1 Handle
2 Start button
3 Coupling nut
4 Pipe
5 Fork
6 Cover
7 Lever for height adjustment
8 Housing
9 Device cable
10 Release button
11 Ignition key
12 Release button
13 Rechargeable battery
14 Cleaning spatula
15 Blade
16 Blade bolt
Function Description
The agile cordless lawnmower has a rotat-
ing cutting tool parallel to the cutting plane.
The machine can be adjusted to 3 heights.
Please refer to the following descriptions
for the function of the controls.
Technical data
Cordless Lawn
Mower 20V...........PRMHA 20-Li A1
Rated voltage U .......................... 20 V
Idling speed n ........................ 6000 min
Cutting circle ............................. 220 mm
Cut height ............................ 30 - 50 mm
Protection class ....................................III
Protection type .................................IPX1
Weight ...................................... 5.5 kg
Sound pressure specifi cation
(L
) .............. 73.5 dB(A); K
pA
Noise level specifi cation (L
measured ..... 83.5 dB(A); K
guaranteed ........................... 88 dB(A)
) ......................... ≤ 2.5 m/s
Vibration (a
h
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
GB
MT
-1
= 2.31 dB
pA
)
WA
= 2.31 dB
WA
2
21
Publicidad
