Baker Hughes Druck DPI620G Guia De Inicio Rapido página 4

6. Use the five Pozidriv screws to set the cover in position.
Figure 1: Rear View
5. Charge the Battery
1. Connect the DC power supply/battery charger unit to
the +5V connection on the side of the unit (Ref:
DC
Figure 2).
2. The battery can also be charged using the USB
connections (Ref: Figure 2).
3. The device can be charged when either ON or OFF.
Charge times can be longer when the device is ON.
5.1 Battery Charging
Charging Connection
DC Power Supply
External Battery Charger
Mini USB Connection
6. Basic Modes
6.1 Power On
When the device is OFF: push the power button (Ref:
Figure 2) until the display shows the dashboard screen.
1
Figure 2: Side View
6.2 Power Off
Push and keep down the power button until the screen is
blank.
Copyright 2013 Baker Hughes Company.
2 | DPI620G Safety Instructions–English
Charge Time
6.5 Hours
6.5 Hours
13 Hours
+5V DC
6.3 Sleep Mode
Push and release the power button to select the sleep
mode.
6.4 Power up from Sleep Mode
Ref: Section 6.1, "Power On," on page 2.
When energized (power-up) from sleep mode, the
instrument always opens the last screen shown before
sleep mode was selected.
6.5 Themes
Two color themes are available: Druck Dark and Druck
Light. Select the wanted theme for the light level. Tap the
Settings icon to access Themes.
7. Modes of Operation
The Druck DPI620G can be used as a:
• Calibrator (with independent functions on each of six
channels).
• HART® Communicator (Optional)
• Foundation Fieldbus Communicator (Optional)
• Profibus (Optional).
7.1 The Dashboard Navigation.
1 Indicator light shows active function.
Figure 3: Dashboard - Touch Screen
1. Indicator light shows that the function is in operation.
Note: Fieldbus and Profibus are not installed on all units.
7.2 Set Date, Time and Language
Tap the Settings icon then tap the Device
to access the Date, Time and Language menus.
7.3 Druck DPI620G Manual
To access help data, tap the Help
Dashboard. All the information necessary to operate the
Druck DPI620G is in the Help section of the Dashboard.
icon
icon on the