Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Inspecting
Mechanical
1. Check the plastic base assembly to ensure that it is intact
2. Check the dishwasher's feet to ensure they are in place and can be adjusted so you can
level and secure the dishwasher.
3. Check all the visible components on the bottom of the dishwasher to ensure they are
intact and secure.
4. Check the door latch, the operation of the hinges, and confirm the door is properly
secured to the dishwasher.
Plumbing
1. Check the hot water connection on the back left-side of the base of the dishwasher.
The mounting plate should be secured to the back of the base, the threads inside the
connection should be smooth and shiny, and the area should be clean and free of any
debris.
2. Make sure the dishwasher and the accessories are all included in the package to ensure
these assemblies are not cracked and that all connections are secure.
3. Check the drain hose for any holes or deformities that could allow a water leak during
draining.
Electrical
1. Confirm the junction box cover is secured to the junction box on the front right-side of
the base of the dishwasher.
2. Confirm the electrical box was not damaged during shipping and that it is secured to
the base of the dishwasher.
Appearance
1. Confirm there are no dents or scratches on the front of the dishwasher.
2. Check the edges of the doors for any roughness or cracking.
3. Check the control panel to ensure it is clear and unscratched, and that all the control
markers are in their proper places.
Parts
Confirm you have all the parts listed in STEP 1 on page 6.
16
English
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 16
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 16
2023-05-03
2023-05-03
11:50:03
11:50:03
Publicidad
