Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 10 Securing the dishwasher
You must secure the dishwasher to the countertop or cabinet side walls for additional
stability and safety.
To the countertop
If the countertop is made of wood or the material will not be damaged by drilling, follow
this.
28
English
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 28
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 28
1. Put a large towel into the bottom of
the dishwasher(covering the filter) to
prevent wood shavings or a dropped
screw from falling into the sump.
2. Insert the provided brackets into the
top front holes of the dishwasher as
shown.
If the brackets are too long, cut them
down using pliers.
3. Pre-drill the overlapping holes of the
brackets.
Make sure the hole is smaller than the
diameter of the screw.
4. Tighten the provided screws.
5. Assemble the provided plastic caps as
shown.
CAUTION
• After installing the dishwasher inside
the cabinet, check if the door opens and
closes freely with no interruption with
the cabinet.
• If the plastic caps are not assembled,
water may leak and cause a fire or
electric shock.
2023-05-03
2023-05-03
11:50:06
11:50:06
Publicidad
