Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 9 Leveling the dishwasher
1. Open the door and place the level
against the top of the tub on the inside
and check if the the dishwasher is level.
If it is not level, rotate the leveling legs
at the bottom front of the dishwasher
until the dishwasher is level.
See the first note below for instructions
on adusting the height of the front legs.
2. Use the level to check if the dishwasher
is level front to back, as shown in the
figure to the right.
If the dishwasher is not level front to
back, adjust the height of the rear leg
until the dishwasher is level.
See the second note below for
instructions on adusting the the rear
leg.
NOTE
To prevent leaks from the door, make sure
that the front of the dishwasher is not
lower than the back.
3. Open the door of the dishwasher
and check if both the tub and door
clearances are correct.
If not, rotate the leveling legs on the
bottom front of the dishwasher.
You can aslo check this by placing a
level against an inside front vertical
surface of the tub.
26
English
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 26
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 26
2023-05-03
2023-05-03
11:50:05
11:50:05
Publicidad
