Publicidad
Idiomas disponibles
Idiomas disponibles
B
Function
10
indicator
Warning
11
indicator
12
Screen
Water softener
• The water softener must be set manually, using the water hardness dial.
• The water softener is designed to remove minerals and salts from the water, which would
have a detrimental or adverse effect on the operation of the appliance.
• The more minerals there are, the harder your water is.
• The softener should be adjusted according to the hardness of the water in your area.
• Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
• The dishwasher is designed to allow for adjustment in the amount of salt consumed based
on the hardness of the water used. This is intended to optimise and customise the level of
salt consumption.
• Please follow the steps below for adjustment in salt consumption.
1. Close the door, switch on the appliance;
Using the appliance
Strwash
To wash very dirty, hard to clean dishes. (It can only be
used with Intensive, Universal, ECO, Glass, 90 min )
Extra Drying
For better drying result. (It can only be used with
Intensive, Universal, ECO, Glass, 90 min )
Express
Reduce the program time. (It can only be used with
Intensive, Universal, ECO, Glass, 90 min)
Rinse Aid
If the "
low on dishwasher rinse aid and requires a refill.
Salt
If the "
low on dishwasher salt and needs to be refilled.
Water Faucet
If the "
closed.
To show the and delay time, error code etc.
22
" indicator is lit, it means the dishwasher is
" indicator is lit, it means the dishwasher is
" indicator is lit, it means the water faucet
EN
Publicidad
