Publicidad
Idiomas disponibles
Idiomas disponibles
B
Description of
Program
cycle
Prewash
Soak
NOTE
ECO (*EN60436): The ECO program is suitable to clean
normally soiled tableware, that for this use, it is the most
efficient program in terms of its combined energy and water
consumption, and it is used to assess compliance with the
EU ecodesign legislation.
Saving energy
1. Pre-rinsing of tableware items leads to increased water and energy consumption and is
not recommended.
2. Washing tableware in a household dishwasher usually consumes less energy and water
in the use phase than hand dishwashing when the household dishwasher is used according
to the instructions.
Starting a programme
1. Draw out the lower and upper basket, load the dishes and push them back. It is
commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page "Product fiche". Make
sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause button, the
dishwasher will start its cycle.
Changing the program mid-cycle
• A programme can only be changed if it has been running only for a short period of time,
otherwise the detergent may have already been released or the the wash water with
detergent has already been drained. If this is the case, the dishwasher needs to be reset and
the detergent dispenser must be refilled.
Using the appliance
Detergent
pre/main
wash
33
Running
Energy
time(min)
(kWh)
15
0.018
EN
Rinse
Water (L)
aid
3.6
Publicidad
