JVC LT-32FD300 Manual De Instrucciones página 97

USING THE MENUS
OSD Timer :
OSD timer is used to set only the duration of main
menus (not for info bar for example). You can select
from: 5s/ 15s/ 30s.
Lock
The Lock Menu allows you to set the following
changes.
• System Lock – Press the ENTER button to unlock
the other settings in this menu. Default password
is 1234.
• Set Password – If you change the password, be
sure to remember the new password! If you forget
it, use the super password 4711.
• Channel Lock – It is used to prevent children from
watching unsuitable programs.
• Parental Guidance – Select the number of age
which is suitable for your children.
• Key Lock – It is used to prevent children from
pressing the buttons.
• Hotel Mode – When activating this option, you
can make the following settings:
* Source Lock – Lock the source you want.
* Default Source – Press the ENTER button to
select.
* Default Prog – It is available when the default
source is TV.
* Default Volume – It is default boot volume.
* Max Volume – You can adjust the max volume
level.
* Import Database – Import database from USB
to TV.
* Export Database – Export database from TV
to USB.
* Clear Lock – Reset all the lock settings to the
factory defaults.
12
Setup
The Setup Menu allows you to change the settings
related to audio and subtitle languages, Aspect Ratio,
Reset, etc.
Your TV supports HDMI CEC (Consumer Electronics
Control).
When your HDMI devices supports HDMI CEC, You
can operate the HDMI devices connected to your TV
with the TV's remote control. Also, by turning on the
power of the HDMI devices, it is possible to turn on
the TV.
• To use HDMI CEC, you must turn on HDMI control
in the menu of the HDMI devices following the
instruction manual of your HDMI devices.
• Depending on the connected HDMI device, some
HDMI CEC features may not work properly.
To turn on the HDMI CEC function on your TV
1. Press the MENU button to display the setup menu.
▼
2. Press the button until the HDMI CEC option is
highlighted. Press the ENTER button to display the
submenu.
▼
3. Press the button to highlight the CEC Control
item.
◄/►
4. Press the button to select On.
5. Press the EXIT button to exit from the menu.
Device Auto Power Off
Device Auto Power Off automatically turns off the
connected HDMI device when you turn off your TV.
TV Auto Power On
TV Auto Power On automatically turns on your TV
when an HDMI CEC device is turned on or played the
disc.