KitchenAid Ultra Power 5KSB52EAC4 Instrucciones Y Recetas página 35

To Operate Your Blender
INGREDIENT CAP
Remove cap and add ingredients at
or speeds. When operating at
higher speeds, with a full jar or hot
contents stop blender and add
ingredients.
60 ml 60 ml
2 liters 2 liters
30 ml
30 ml
1 liters 1 liters
STEP START™ FEATURE
Step Start™ feature automatically starts
the blender at a lower speed to prevent
splattering then quickly increases to the
selected speed for optimal performance.
PULSE FEATURE
®
Your KitchenAid blender has a
"Pulse At Any Speed" feature.
• Before operating the blender, make
sure the jar is properly assembled
(see page 9) and in place on the
blender base. Put ingredients into
blender jar and attach lid firmly.
• Press the pad. The green
indicator light should be blinking,
showing that the blender is activated.
• Press the pad. The indicator
light above the pad will glow,
indicating that all the speed pads are
in the Pulse mode.
r
ml ml liters liters
100 0 100 0
1 1
750 750 3 3
4 4
500 500 1
1
2 2
250 250 1 1
4
4
• Select a speed pad and press for the
desired length of time (a short delay
reaching the selected speed is normal
due to the Step Start™ feature.)
• To turn the Pulse feature off, just
press the pad again. The
blender is now ready for continuous
operation. Before removing the
blender jar, deactivate the blender by
pressing the pad and unplugging
the power cord.
NOTE: Use a rubber spatula to
redistribute ingredients ONLY when the
blender is and unplugged. Never
use any utensil, including spatulas, in
the blender jar while the motor is
running.
11