EDIFIER S880DB Manual De Usuario página 10

Ocultar thumbs Ver también para S880DB:

Idiomas disponibles

USB digital audio Input

1. Press the volume dial on the active speaker or press the SOURCE key on the remote control to select USB input,

LED light will shows USB input.

2. Play from your device and adjust the volume accordingly.

Tips:

USB interface chip in the S880DB is a XMOS chip used by high-end audio equipment. After being connected to

PC, USB interface will directly extract and play back digital audio signal in a manner similar to the "USB external

audio streaming", to avoid sound degradation and dynamic range compression caused by digital-to-analog

conversion of PC audio streaming, and to ensure the restoration of original sound quality.

Note:

1. Default USB driver for audio on Windows 7/Windows 10 operation system supports only USB Audio Class 1, which

limits the audio stream to only 2 channels PCM with highest sample rate of 96kHz. To support PCM with higher

sample rate(e.g., 192kHz etc.), USB interface of S880DB is built on USB Audio Class 2, therefore specific driver

is needed for using with Windows 7/Windows 10. Please refer to https://www.edifier.com/product-s880db.html for details.

2. Please understand Windows XP operation system is no longer maintained by Microsoft, driver software to work with

Windows XP is no available. There may be risk warning during installation, please install according to your needs.

3. USB driver in Mac OS supports USB Audio Class 1 and USB audio Class 2 by default, therefore no dedicated driver

software is needed for S880DB to use with Mac computer.

4. For further information referring to the driver software, please log on the link below for details:

https://www.xmos.com/support/usb-audio-driver-support

5. If you need to buy USB A-to-B data cable, you can search for and buy it on various e-commerce platforms.

6. In USB mode, PCM stream with various sample rates is supported, including 44.1kHz/48kHz/96kHz/192kHz.

Note: The play control under USB input belongs to USB HID control, this control needs support of player software,

and so there may be compatibility differences for different audio player software.

English