Publicidad
Idiomas disponibles
Idiomas disponibles
Upper Rack Height Setting - When Rack is
Empty
In certain models, the height setting of the upper
rack may be changed using the wheels which
are present at two height levels.
NOTICE: Bringing the wires to
the horizontal position by holding
them from the tips may cause
them to bend. Therefore, it will
be appropriate to bring the wires
in the middle to horizontal or
vertical position by holding them
from their stems and pushing.
1. Release the latches on both the right and left
tshelves of the upper rack by turning them to the
outside A.
2. Pull out the rack completely B.
3. Place the rack into the tshelves again at the
desired height C.
4. Push the latches back into the correct position
USA - CAN - 21
Publicidad
