ATOMSTACK B3 Instrucciones De Uso página 13

3.4.2 Move the engraving pattern to the desired location,
set the engraving parameters, and click "Start."
3.5 How to Record a Video
3.5.1 Select "None" in the camera control to turn off the camera.
3.4.3 After engraving is complete, see the results below.
3.5.2 Enable the system's camera. For Windows systems, if
recording is within 3 hours, use the built-in camera, otherwise, it
is recommended to download free recording software such as
PotPlayer. For macOS systems, it is recommended to use Camera
Record-Video Recorder or Quick Player.
11