Publicidad
Idiomas disponibles
Idiomas disponibles
1.LED Light Function in the Protective Box
The LED light in the engraving machine automatically turns on when the machine is powered on and turns off when it is powered off.
2.Box Opening Detection Function
2.1 Precautions:
2.1.1 Box opening detection is controlled by limit switches. If one of the limit switches malfunctions, the box opening detection function
will be disabled.
2.1.2 The machine should be placed on a flat surface and should not be warped.
2.1.3 After opening the lid, you can use the autofocus and positioning assist functions, but you cannot start engraving, and you need to
close the lid to continue engraving.
2.2 How to Enable the Box Opening Detection Function
To enable the box opening detection function, ensure that the protective box is installed properly, the connections are correct, and the
machine is powered on.
2.3How to Enable the Box Opening Detection Function
2.3.1When the box cover is opened, the buzzer will sound and Host computer, PC terminal will display the following prompts:
Display screen prompt: "Box abnormally opened";
Chassis opens abnormally
Close
02
Publicidad
