INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all product's packaging has been
removed.
• Please read carefully the "Safety advice and warnings"
booklet before first use.
• Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the «Cleaning» section.
USE
• Extend the supply cord completely before plugging it in.
• Ensure the blade fixing ring is fixed properly to the jar (by
turning clockwise) before putting on the motor body.
• Place the jar onto to the motor unit until it fits properly
into place.
• Put the ingredients, after having first chopped them into
small piece, into the jar with liquid .Do not exceed the
maximum marker.
• Put the lid on the jar. Make sure it is properly fixed in
place.
• Put the measuring cup in the lid.
• Connect the appliance to the mains.
• Prior Glass 1500 and Prior Inox 1500: The illuminated
ring comes on. To start the appliance set the position "1"
on the speed selector knob. Select the desired speed by
turning the knob clockwise, then begin blending.
• Prior Advance 1800 and Prior Advance +1800: To
start the appliance set the position "I" on the speed
selector knob. The illuminated ring comes on. Select the
desired speed by turning the knob clockwise or select
a function by pressing the desired function button (K, L,
M), then begin blending. Note: if you need to add more
ingredients or manipulate the jar, please make sure
you had the electronic speed control in position 0 to
avoid undesired start
• If you wish to add more ingredients pull out the measuring
cup.
• Add the ingredients and replace the measuring cup.
• To stop the appliance set the speed back to "0".
• To avoid a fierce start up, it is advisable to start off from
the lowest speed position and, once the appliance has
been switched on, progressively increase the speed to
the desired position.
ELECTRONIC SPEED CONTROL
• The speed of the appliance can be regulated by using the
speed selector knob (I). This function is very useful, as it
makes it possible to adapt the speed of the appliance to
the type of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Stop the appliance, selecting position "0" on the speed
selector knob.
• Unplug the appliance from the mains.
• Lift the jar from the motor body
• Clean the appliance.
TURBO FUNCTION
• The appliance works in highest speed to achieve optimal
performance.
• Prior Glass 1500 and Prior Inox 1500: Turn the speed
selector knob to the left to operate the turbo function. We
recommend working by turning the knob in cycles of 3
seconds and repeating the operation until you obtain the
desired result.
• Prior Advance 1800 and Prior Advance +1800: With the
selector knob in the I position, press this button to operate
and release the button when you wish to stop operating.
We recommend working by pressing the button in cycles
of 3 seconds and repeating the operation until you obtain
the desired result.
SMOOTHIE FUNCTION (*)
• This function is designed to make smoothies, creams,
purees, gazpacho...
• IMPORTANT: Never work with liquids that are boiling or
ingredients whose temperature exceeds 80 ºC.
• With the selector knob in the "1" position, press the
smoothies button to operate the function (K).
• By activing this function, the appliance will automatically
activate and it will vary its speed up to 1 minute. Can
deactivate the function manually pressing again the
function button.
ICE CRUSH FUNCTION (*)
• This function gives optimal result for ice crushing, up to
desired snowy level.
• Do not add more than 12 ice cubes of 20x20x20 mm.
• With the selector knob in the "1" position, press the ice
crush button to activate the function (L).
• When activating this function, the appliance will
automatically activate for 1 second, stop and activate
again. So on until 1 minute or to deactivate the function
manually.
SELF-CLEANING FUNCTION (*)
• This function is designed to make a pre-clean in the jar
and make the cleaning easier.
• Put water and a small amount of washing up liquid in the
jar.