TrolMaster TCS-1 Manual Del Usuario página 7

Understanding The Menu / Pages
There are 4 Main menu pages on the TCS-1. When you first power on the controller, the Home page will be
shown. On that page you can see the current environmental conditions inside the tent. Pressing the right
arrow button will bring you to the current irrigation conditions. You can also use the left arrow button to
view the Device status and the Alarm messages pages. The Device status page will show the current status
(On / Off) of each device connected to the TCS-1. The Alarm page will show the most recent alarm
messages.
Setting
Setting
Temp
Day & Night
2 2
Climate
Humid
Light Device
EC Fan System
Day Setpoint
Temp Humid CO2
70 65 1200
F % ppm
o
Night Setpoint
Temp Humid CO2
55
400
F 50 ppm
o
%
Lighting
Setting
Line 1
Line 2
Line 1 Lighting
Setting
Mode LED
Power 100%
On at 20:00
Off at 08:00
Dim at o
84 F
o
Stop at
89 F
Sun R/S time OFF
TCS-1 Setting Pages
From the main menu on the TCS-1, when you press ENTER on the Tent-X, you will
enter a Setting page consisting of five blocks, with each block accessing a
specific page with settings for Climate settings, Lights, Devices, EC fans and
System settings.
Day&Night Climate
After pressing ENTER on the Day&Night Climate tab, you will open the page where
you can set the temperature, humidity, and CO2 levels in the grow tent for both
day and night. After the climate parameters have been set, the climate devices
connected to the Tent-X will automatically maintain those settings.
Lights
After pressing ENTER on the Light block, the screen will display Line 1 and Line 2.
Use the UP and DOWN arrows to choose Line 1 or Line 2 and press ENTER to
navigate to the page where you can make changes to the selected Line.
On this page, you can create your light settings. Use the UP and DOWN buttons to
navigate the options on this page and press ENTER on an item to change it. When
you see the item blinking, you can switch between the selections using the UP
and DOWN arrows. When you have selected your item, press ENTER again to
confirm the selection. Select whether you' re using HID or LED lights. You can
also select the On/Off time for your lights, the temperature at which the lights will
dim, the Sunrise and Sunset time, and more.
07