Publicidad
Idiomas disponibles
Idiomas disponibles
controller will assign an address to the device modules sequentially. Once the device modules are
addressed, the addresses will be saved unless the user completes a factory or device reset in the system
setting menu.
There are individual limits to how many device modules can be connected to the TCS-1.
Temperature = 2 -------- Heating or Cooling
Humidity = 2 ------------ Dehumidify or Humidify
CO2 = 2 ----------------- Increase or Decrease CO2 levels
Timer devices = 4 ------- recycling or schedule timers
Below is a list of all of the device modules that can be used with the TCS-1.
2 x DSC-1:
2 x DSH-1&2:
2 x DST-1&2:
2 x DSP-1&2:
*
DSD-1:
*
DSV-1:
*
DCC-1:
2 x ARS-1:
*
4RS-2:
*Note:
Keep in mind the maximum number of each device module that can be connected as stated above.
4. EC Fans Connections
The TCS-1 can control EC fans. We will divide those fans into two categories, standard EC fans and Aerofan
EC fans.
Standard EC fans
that can be controlled using a 0-10 volt or PWM signal can be connected to the TCS-1
using the optional EFC-1 fan interface module. Users can control two EC fans at the same time, categorized
as F1 and F2. Each fan will be connected to a separate EFC-1 that is connected into the device RJ12 port.
The first and primary fan, called F1, can be used and controlled as an exhaust fan to control temperature
and humidity. As the Temp or Humid increases, the fan speed also increases. The second fan, F2, can
Device station for CO2
Device station for humidity
Device station for temperature
Device station for timer control
Dry-contact device station, with N/O and N/C contacts.
*
Universal module.
Low-voltage device station (12-24V, AC/DC)
*
Universal module.
Dual condition adapter, allows a single DS type device station to have 2 control settings
*
Universal module
Mini-split AC control module, controls most mini-splits.
*
See TrolMaster website for details about which mini-splits can be controlled, and
which cannot.
The 4RS-2 device module was designed specifically for the TCS-1. It provides a single
control module that features 4 separate controlled power outlets. Each 4RS-2 can
control a temperature and a humidity device as well as two separate timer controlled
devices like fans or pumps.
*
Using the 4RS-2 module will use up 1 temp, 1 humidity and 2 timer slots.
04
Publicidad
