cecotec POWER TITANIUM 900 PROGO Manual De Instrucciones página 30

ENGLISH
Operation
1. Place the blender on a flat surface. Then, open the jug.
2. Put the ingredients you want into the jug. Make sure that they do not exceed the "MAX"
mark.
3. Attach the blade assembly to the jug base.
4. Turn the jug upside down and put both parts together in the base.
5. Press and hold the PULSE button, the appliance will start operating.
6. Release the PULSE button, the appliance will stop.
7. Turn the jug upside down and place it on a flat surface. Remove the blades assembly and
place the lid on the jug.
NOTE:
- The appliance can only be used for a maximum of 60 seconds continuously. Before using it
again, it should be allowed to cool down.
- The blender parts are not dishwasher safe.
- Only use it with liquids and soft fruits. Cut the fruits into pieces. Do not put fruit that is too
hard in the jug.
- In case of overload, the motor will stop automatically. If this happens, empty the jug and
wait 15 minutes to allow the motor to cool down. After this time, you can use the blender
again.
4. CLEANING AND MAINTENANCE
Cleaning
1. Before cleaning the product, unplug it from the wall socket.
2. After using the blender, wipe the body with a damp cloth and dry it with a dry cloth.
NOTE:
- Keep the blender away from water and humidity.
- Never wet or immerse the motor unit, cable, or plug in water.
3. Clean the lid and the blades with water.
4. Keep children away from the blades.
5. Do not wash the blender with thinners, benzene, or any other similar products.
6. Keep the blender away from direct sunlight and do not use it in damp places.
7. Do not immerse the motor unit or power cable in water for cleaning.
30 POWER TITANIUM 900 PROGO