Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets
A
Metra. The World's Best Kits.
®
Toyota Prius V
Visit
MetraOnline.com
specific applications
KIT FEATURES
• DDIN radio provision
• Single DIN radio provision with pocket sold separately
• Painted matte black
B
MetraOnline.com
2015-2017
for more detailed information about the product and up-to-date vehicle
© COPYRIGHT 2024 METRA ELECTRONICS CORPORATION
95-8273B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: 40LX-11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 4/10/24 INST95-8273B
Publicidad
Manuales relacionados para Metra 95-8273B
Resumen de contenidos para Metra 95-8273B
- Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. ® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/10/24 INST95-8273B...
- Página 2 DASH DISASSEMBLY 1. Unsnap and remove the shifter trim 3. Unsnap the vents from above the factory panel. (Figure A) radio. (Figure C) 2. Open the glove box then unsnap and 4. Remove (4) 10mm bolts to remove the remove the box and door as one unit. factory radio.
- Página 3 (Figure A) 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Snap the radio trim panel over the new radio and reassemble dash in reverse order of disassembly.
- Página 4 Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 5:00 PM Sunday: 10:00 AM - 4:00 PM Metra recommends MECP certified technicians Metra. The World’s Best Kits. ® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/10/24 INST95-8273B...
- Página 5 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. Metra. The World’s Best Kits. ® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/10/24 INST95-8273B...
- Página 6 DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel de la 3. Suelte a presión las rejillas de la parte superior del radio de fábrica. (Figura C) palanca de velocidades. (Figura A) 2. Abra la guantera, luego suelte a presión 4.
- Página 7 (Figura A) 2. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 3. Ponga a presión el panel de la moldura del radio sobre el nuevo radio y vuelva a armar el tablero al revés de como lo...
- Página 8 Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 5:00 PM Sunday: 10:00 AM - 4:00 PM Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. ® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/10/24 INST95-8273B...