DragonTouch VISION 3 Manual De Usuario página 19

EN
Adjusting the Zoom Level
The Zoom function enables you to adjust the proximity of the subject in your
footage. The Vision 3 action camera supports up to 4X zoom. The zoom feature is
available only in Video and Photo Mode. Please follow the steps below to zoom in or
out.
1. Turn on the Vision 3 action camera.
2. Enter Video or Photo mode.
3. Press the Up or Down button to adjust the zoom level.
Reformatting Your Memory Card
To keep your memory card in good condition, please reformat it on a regular basis.
Reformatting deletes all of your content, so be sure to transfer your photos and
videos first. Please follow the steps below to format the card.
1. Turn on the Vision 3 action camera.
2. Enter the system settings screen.
3. Press the Down button to find the "Format" option.
4. Press the OK button to confirm, and the screen will show "Format memory card?
Confirm / Cancel".
5. Press the Up button followed by the OK button. Your memory card will be
formatted successfully.
Maintaining Your Camera
Follow these guidelines to get the best performance from your camera:
1. For best audio performance, shake the camera or blow on the mic to remove dust
or ash before use.
2. To clean the lens, wipe it with a soft lint-free cloth. Do not clean the lens with
anything else.
3. Do not touch the front lens directly with your fingers.
4. Keep the camera away from drops and bumps which may cause damage to the
parts inside.
5. Keep the camera away from high temperatures and strong sunlight to avoid
damage.
17