DragonTouch VISION 3 Manual De Usuario página 21

EN
Remote
When the camera is turned on, it will be automatically connected to the remote
within 10 meters of distance. You can control the camera to take photos or record
videos using the remote.
Video
To record video, first make sure the camera is in Video mode, then press the Video
button. The camera's working indicator will be flashing during video recording. To
stop recording, press the Video button again.
Photo
To capture a photo, first make sure the camera is in Photo mode, then press the
Photo button. The camera will emit a shutter sound indicating the completion of the
shot.
Replacing the CR2032 battery of the remote
1. Use a screwdriver to remove the four screws on the back, cover of the remote
allowing you to open it.
Photo Button
Video Button
19
Note: The remote is splashproof only.