Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance & Cleaning
REMOVE THE OVEN DOOR (OPTIONAL). OPTION 1
1. To remove the door, open the door to the maximum angle. Then pull the door hinge tab backwards
(Figure 1).
2. Close the door to an angle of approximately 15°. Slowly lift and pull the door off the oven (Figure 2).
3. Place the door in a horizontal position with the top cover toward you, place your hands on the glass
and pull it toward the oven.(Figure 3)
4. Carefully pull the glass apart by lifting it approximately 25° (Figure 4).
5. Push the glass to the position indicated by the arrow in Figure 5. Gently pull the glass out of the socket.
6. After removing the inner pane, pull the glass out of the interlayer as shown in Figure 6.
7. When cleaning is complete, reverse the above procedures to return the door to its original position.
REMOVE THE OVEN DOOR (OPTIONAL). OPTION 2
1. To remove the door, open it to the maximum angle. Then pull the door hinge tab
backwards.
2. Close the door to an angle of approximately 30°. Hold the door with one hand on
each side. Slowly lift the door up and out of the oven.
3. Open the door rotation bracket assembly, see the action in the following picture.
4. Lift the outer door glass and pull it out, then pull the center door glass out in the
same manner.
WARNINGS:
Do not force the door out and avoid breaking the glass during the disassembly pro-
cess.
The hinge springs could come loose, causing personal injury.
Do not lift or carry the oven door by the handle.
50
English
A Glass
B Rubber gasket
infiniton.es
Publicidad
