Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Electric pressure washer
• Handle
• High-pressure hose holder
• Nozzle storage board
• Spray wand protector
• Trigger gun holder
• 4.8 x 20 screws (2)
• 4.8 x 16 screws (9)
• Spray wand
• Trigger gun
• Needle clean-out tool (included with manual packet)
• Five (5) Quick-Connect nozzles (0°, 15°, 25°, 40° and Soap)
• High-pressure hose
• Garden hose adapter (female coupler)
• Manual with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the All Season Power customer service center at
1-866-225-9723.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver
1. Slide the high-pressure hose holder in position on the
handle, fix with four 4.8 x 16 screws provided (Fig. 1).
Fig. 1
Pressure hose holder
2. Slide the handle with high-pressure hose assembly in
position on the top of the pressure washer, fixed with two
4.8 x 20 screws and two 4.8 x 16 screws as shown
(Fig. 2).
Fig. 2
3. Put on the nozzle storage board in position and secure with
two 4.8 x 16 screws (Fig. 3).
8
Handle
Fix with 4
4.8 x 16 screws
Handle assembly
Fix with 4.8 x 16
screws
Fix with 4.8
x 20 screws
Publicidad
