Descargar Imprimir esta página

Craftsman CMEBL710 Manual De Instrucciones página 7

Ocultar thumbs Ver también para CMEBL710:

Publicidad

Idiomas disponibles

Idiomas disponibles

or removing/installing attachments or accessories. An
accidental start-up can cause injury.
Your CRAFTSMAN power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Cleaning

WARNING:
air vents with clean, dry air at least once a week. To minimize
the risk of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.

WARNING:
harsh chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with water
and mild soap. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
Accessories

WARNING:
those offered by CRAFTSMAN, have not been tested with this
product, use of such accessories with this product could be
hazardous. To reduce the risk of injury, only CRAFTSMAN
recommended accessories should be used with this product.
Recommended accessories for use with your product are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN. Call 1‑888‑331‑4569.
VersaTrack™ (Fig. A)

WARNING:
serious personal injury, turn unit off and disconnect
it from power source before making any adjustments
or removing/installing attachments or accessories. An
accidental start-up can cause injury.

WARNING:
personal injury, do not use a damaged VersaTrack™ peg
hook or VersaTrack™ Trackwall. A damaged VersaTrack™ peg
hook or VersaTrack™ Trackwall will not support the weight
of the tool.

WARNING:
personal injury, DO NOT suspend tool overhead or suspend
objects from the peg hook. ONLY suspend tool on the
VersaTrack™ Trackwall using the peg hook.

WARNING:
does not exceed the maximum rated weight of 20 lb (9 kg) for
the selected VersaTrack™ hook.

WARNING:
a VersaTrack™ Trackwall rail, adequately space the tools in
order to not exceed 75 lb (35 kg) per linear foot.
iMPORTAnT: VersaTrack™ accessories mount compatible
tools securely to the VersaTrack™ Trackwall system.
1. Turn the tool off, disconnect it from power source
and accessories.
Blow dirt and dust out of all
Never use solvents or other
Since accessories, other than
To reduce the risk of
To reduce the risk of serious
To reduce the risk of serious
Ensure that the tool weight
When hanging objects on

CAUTION:
cutting teeth must have them covered securely if it is to be on
the VersaTrack™ Trackwall.
2. Mount the integral hang hook 
VersaTrack™ Trackwall.
3. Flip or pull open the integral hang hook 
locked into position.
4. Mount the integral hang hook to the
VersaTrack™ Trackwall.
nOTE: VersaTrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN. Call 1‑888‑331‑4569.
Repairs

WARNING:
and RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a factory service
center or an authorized service center. Always use identical
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.craftsman.com/account/login.
Three‑Year Limited Warranty
For warranty terms, go to www.craftsman.com/pages/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at CRAFTSMAN, 701 East Joppa Road,
Towson, MD 21286 or call 1‑888‑331‑4569.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country-specific warranty information contained in
the packaging, call the local company, or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑888‑331‑4569
for a free replacement.
English
Any product with exposed
 7 
to the
 7 
. It clicks when
To assure product SAFETY
7

Publicidad

loading