Pioneer XDV-P6 Manual Del Usuario página 10

Connecting the Units
Connecting the Power Cord
Hide-away unit
10
Fuse resistor
Fuse resistor
Fuse holder
(4 A)
Red
When using this product in STAND ALONE
mode, connect this cord to electric terminal
controlled by ignition switch (12 V DC) ON/OFF.
When using this product in IP BUS mode,
do not connect this cord.
Orange/white
To lighting switch terminal.
Y Yello Yello w
To terminal always supplied with power
regardless of ignition switch position.
Black (ground)
To vehicle (metal) body.