NODOR NorCook IH N6404 BK Manual De Instrucciones página 28

again within 3 seconds. The Pause key (3) will blink for a maximum of 60 seconds. Hold down this key while
pressing, one by one, all the zone selection keys (10) in a clockwise direction, starting with th front left key.
The setting parameter code is shown in the display (R) on the top row. To change the parameter, press on the
display (R) and make a direct selection (without sliding your finger) on the slider (2).
The parameter value is shown in the display (T) on the bottom row. To modify it, press on the display (T) and
make a direct selection (without sliding your finger) on the slider (2). Only available values will be displayed.
To discard the changes and leave the settings menu, press the Pause (3) key.
To save the changes and leave the settings menu, press the on/off button (1) for 2 seconds.
If no key is pressed for 1 minute, the system automatically leaves the settings menu without saving the
changes.
Code
U2
U3
U4
U5
U6
U7
60819760.31.08.2020.indd 28 60819760.31.08.2020.indd 28
Parameter
Key sound volume
Warning sound vo-
lume
Display brightness
Timer display
Automatic cookware
detection
Timer completion
notice
Possible values
0-1-2-3 0: No sound
3: Maximum
0-1-2-3 0: Minimum
3: Maximum
0-1-2-3-4-5-6-7-8-9 0: Maximum
9: Minimum
0-1 0: No timer anima-
tion
1: Digits are anima-
ted during the last
minute
0-1 0: Automatic
cookware detection
activated
1: Automatic
cookware detection
deactivaded
0-1-2 0: Beeping for 120
seconds
2: Beeping for 10
seconds
2: No beep
Comments
8/10/20 10:34 8/10/20 10:34