Publicidad
Idiomas disponibles
Idiomas disponibles
1.
General information
Read and observe the operating instructions, keep them as a reference for later and ensure they are accessible at
all times.
2.
Safety
2.1.
SYMBOLS AND MEANS OF REPRESENTATION
Warning symbols
DANGER
WARNING
NOTICE
i
2.2.
INTENDED USE
Mount only on suitable holes.
2.2.1.
Support leg
Two sockets enclosed for customer-side assembly in the support leg by a trained specialist for electro-technical work.
Compressed air coupling enclosed for customer-side assembly in the support leg (only article no. 927067, 927068) by a
trained specialist for mechanical work.
Support leg for assembly on the worktop (750 mm depth) of the GridLine Vario workbench.
Assembly only in combination with stabilising plates, or alternatively with the rear wall or drawer casing.
Cable ducts in the leg for laying connecting cables.
2.2.2.
Stabilising plate
Stabilising plate for installation on the worktop and support leg of the GridLine Vario workbench.
For stiffening and stabilising the workbench.
Double stabilising plate: for connecting two worktops. For flush alignment of two worktops, the joint strip must also be
installed.
2.3.
PERSONAL PROTECTIVE EQUIPMENT
Comply with the national and regional regulations for safety and accident prevention. Protective equipment such as safety
shoes and safety gloves appropriate for the risks associated with the intended activities must be selected, provided and
worn.
2.4.
QUALIFICATIONS OF PERSONNEL
Specialists for mechanical work
Specialists in the sense of this documentation are persons who are familiar with assembly work, mechanical installation,
commissioning, troubleshooting and maintenance of the products and who possess the following qualifications:
Qualification / training in the field of mechanics as specified in the nationally applicable regulations.
Trained specialist for electro-technical work
A trained electrician in terms of this document is a person who has been respectively trained and who possesses the skills
and experience to recognise and avoid the dangers of working with electricity.
3.
Installation instructions
i
Two persons working together turn the worktop over and place it on a flat and clean support surface.
Meaning
Indicates a hazard which if not avoided will lead to death or
serious injury.
Indicates a hazard which if not avoided may lead to death or
serious injury.
Indicates a hazard which if not avoided may lead to damage
to property.
Indicates useful tips and instructions together with informa-
tion for efficient and problem-free operation.
www.hoffmann-group.com
de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
15
Publicidad
