Ideal Standard A7890AA Instrucciones De Uso página 6

EN
Operating instructions for 3F overhead shower with light
General information:
If the overhead shower and remote control fail to connect, remove the batteries from the remote
control and reinsert them or disconnect and reconnect the plug on the overhead shower!
Remote control battery status:
If the battery is almost empty, the upper LED flashes.
3M
�
Light sensor function:
Within a radius of 1.5m under the overhead
shower, the light switches on when a person
approaches. If the detection area is vacated,
the light goes out after 1 minute.
�
6
�
1x CR2032