Ideal Standard A7890AA Instrucciones De Uso página 7

1
2
The light color and brightness can be adjusted on the overhead shower.
Prerequisite: A Zigbee 3.0 gateway must be available.
3
Set the overhead shower light to pairing mode (Zigbee 3.0):
Set the shower head to pairing mode by pressing and holding the lower button on the remote control
for 3 seconds or by switching the power supply to the shower head on and off three times.
After this process, the light on the shower head flashes and remains in pairing mode for 3 minutes.
Full spray
Silk Rain
spray
Soft spray
OR
Coupling remote control and
overhead shower:
After inserting the batteries, press
the upper button on the remote
control for 3–5 seconds. Both
LEDs flash for 3 seconds on the
right-hand side to indicate that the
pairing was successful. If pairing
fails, both LEDs only flash once.
Jet pattern switching
7