Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Notice:
For a free standing appliance: this refrigerating appliance is not intended to be
used as a built-in appliance
36
Installation
3. The stability can be checked by alternately
bump-ing on the diagonals. The slightly swaying
should be the same in both directions. Otherwise
the frame can warp; possible leaking door seals are
the result. A low tendency to the rear facilitates
the closing of the doors.
Fine tuning of the doors
If the doors are not in one level, this mismatch can
be remedied by following:
Using adjustable foot/adjustable hinge
Rotate the adjustable foot or adjustable hinge
according to the direction of arrow to turn up or
down the foot. Adjustable hinges can be fine tuned
with a 6mm Allen wrench.
Contact after-sale service if needed.
Publicidad
