Jøtul F 400 SE ECO Manual De Instalacion Y Uso página 15

ENGLISH
7.3 Replacing the burn plates
Fig. 20a Replacing the side burn plate
NB: Remove the baffl e plate fi rst (see fi g.18a)
1. Tilt the side burn plate up using the groove at the bottom.
Tip: Use a screwdriver.
2. Edge the side burn plate with the insulation mats.
3. When refi tting, follow the same procedure in reverse order.
(see fi g.20b fi rst (insulation mat)).
Fig. 20b
4. The side burn plate (A) are supplied with insulation mat(B)
on the rear.
14
B
A
Página 15/65
Fig. 21a Replacing the rear burn plate
1. Loosen the rear burn plate by removing the screws shown in
the fi gure.
Fig. 21b
2. Edge the rear burn plate out of the stove.
Fig. 21c
3. Remove the old cement (A) from the cement groove.
4. Apply new cement (A) in cement grooves.
A