EUFAB HARRY Instrucciones De Montaje página 12

Caution:
The safety instructions must be observed!
Observe the authorised axle load.
Before starting each journey and at regular intermediate intervals, check that the carrier is sitting
firmly on the vehicle and that the wheels are properly fixed to the carrier, in order to detect and
rectify any damage to the fixing elements at an early stage.
Before starting each journey and at regular intermediate intervals, verify the correct function of the
lighting system on your rear carrier.
With new hitches, there is frequently a thick black layer of paint on the tow ball. In order for your
rear carrier to gain the best possible grip, this layer of paint should be removed, using corrosive
fluid, solvents etc.
The load must not protrude sideways over the lighting by more than 400mm.
The load must be fixed from the safety belt!
When transporting bikes, do not cover with a blanket or similar.
Ensure that no parts can be lost from the bike whilst driving (bike pump, panniers, shopping bas-
kets etc).
Driving with a bike carrier affects the driving characteristics of a vehicle. You should therefore ad-
just your driving speed. Avoid sudden and jerky steering movements.
When reversing, note that the carrier makes your vehicle longer than normal!
When not in use, the bike carrier should be removed.
The maximum speed is 130 Km/h
For proper and safe fitting, follow the fitting instructions precisely. If in doubt when referring to
these instructions, ask the dealer or the manufacturer directly for further information.
For your own safety, regularly check the carrier and its loading, as you are obliged to do so under §
23 of the German highway code and will be held liable in the event of damage.
The manufacturer and dealer will not be liable for damages to property or injuries to people caused
by incorrect fitting or improper use.
The product has been tested and tried even under extreme conditions and produced good results
with respect to safety and grip.
We are therefore able to exclude malfunctions if the fitting has been carried out correctly.
Dear customer,
you can use this bike carrier for transport of other goods or objects also, if in compliance with the
Road Traffic Regulations, as well as the maximum drawbar load and the payload are kept. But a se-
cure fastening of the goods or objects has to be provided for.
Thank you for buying an EUFAB-Product.
For further information of our wide range of EUFAB products please visit our homepage:
www.eufab.com
12