Publicidad
Idiomas disponibles
Idiomas disponibles
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature t
= 45° C must never be exceeded.
a
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
DESCRIPTION OF THE DEVICE
Features
Multi-function Moving-head
Colour-wheel 1 with 7 different, dichroic colour-filtres and white • Colour-wheel 2 with 4 different, dichroic
colour-filtres and white and additionally with correction-filters 3,200 K and 5,600 K and UV-filter • Switchable
colour change (mode 1: only full colours, mode 2: colour-change at every position) • Rainbow-effect with
adjustable speed in both directions • Slot-in gobo-system for exchanging gobos without tools • Gobo-wheel 1
with 6 rotating gobos plus open • All gobos can be interchanged • Gobo-wheel 2 with 7 static metal gobos
plus open • With gobo-shake function • Effect-wheel with rotating 3-facet prism • Stepless frost-filter for
fading the projections in or out • Macro-function for rotating gobos/rotating prism combinations • Motorized
focus • Motorized Multistep-Zoom (18°, 22°, 26°) • Steplessly adjustable iris • Strobe-effect with 1-13 flashes
per second via shutter • Mechanic dimmer • Exact positioning via 16 bit Pan/Tilt movement resolution •
Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-
Reverse, Program, Reset, lamp on/off, operating hours • DMX-controlled operation or stand alone operation
with Master/Slave-function • 48 preprogrammed scenes in Program Run for stand alone operation • Number
of scenes in Program Run can be changed individually • The scenes in Program Run can be modified via the
Control Board or via an external controller and loaded into the memory • 8 built-in programs can be called
up via DMX-controller • Sound-controlled via built-in microphone • For MSR 700 G-22 lamp • DMX-control via
every standard DMX-controller • Suitable FUTURELIGHT controllers: CP-528 controller
34/113
51838326_V_1_2.DOC
Publicidad
