GB
2. Getting to know your Toaster
COMPONENTS & FEATURES:
A.
Cancel function
B.
Favourite funtion
C.
Crispy side function
D.
Small slice function
E.
Lift lever
F.
Browning level LED indicators
G.
Browning level "+/-" buttons
H.
Crumb tray
I.
Power cable
J.
Toasting slots
K.
Anti-dust lid
3. Before first use
•
Remove any packaging material from the
unit.
•
Remove all accessories from the package
and read this manual carefully. Please
pay particular attention to operational
instructions, warnings and important
safeguards to prevent any injury or
property damage.
•
Clip excess cord into the cord storage clips
underneath the toaster.
•
As with all new heating elements, your
toaster may emit a slight burning or "new"
smell when it is first switched on. This is
normal. The smoke is harmless and will
soon disappear.
•
To eliminate the "new" smell at the first
use, operate the toaster on a medium
setting without any bread inside. Ensure
the room is well ventilated during this
operation.
IMPORTANT:
with a metal object.
4. Using your Toaster
Making toast
1.
Plug in your toaster, the browning level LED
indicator lights will illuminate in a vertical
animation (around 1 sec), level 1 will
remain illuminated on first use. [1]
2.
Touch the browning level "+/-"buttons to
Do not probe inside the toaster
increase or decrease browning level to your
desired setting. [1]
3.
Select the preferred function between
"(
)favourite", "(
or "(
) small slice". [2,3,4]
4.
Insert the slices of bread into the toasting
slots. [5]
5.
Press down the lift lever until it locks into
the lower position to start the toasting. [6]
6.
You can "lift and look" the browning level
of the toast at any time without canceling
the toasting cycle simply rising the lift
lever and pulling it back in place after
checking the toasting level. [7]
7.
You can cancel the toasting cycle by simply
touching the "cancel" button (
8.
When the toasting cycle is finished, your
toast will pop up automatically. If the
bread is small, you can pull up the lift lever
to grab it easily and safely. [9]
9.
After the toaster is cooled, you can put on
the anti-dust lid. [10]
NOTE: The lift lever can not lock into lower
position if the plug is off;
Caution:
1. The bread toasting slots become very hot
during operation. Do not touch!
2. Never operate the toaster without the
crumb tray in place. Otherwise, the table
surface will become too hot and have crumbs.
Tips of making a perfect toast:
1.
For slightly dry bread, use a lower setting
than you normally would.
2.
For very fresh bread or whole wheat
bread, use a higher setting than normal.
3.
For best results, ensure the bread slices
are of even thickness, freshness and size.
Cancel function [A, 8]
If you wish to stop the cycle before it is finished,
simply touch the "cancel" button.
Favourite function [B, 2]
Use this button to memorize the most frequent
combination of settings used.
. Select your settings by pressing Browning level
/ Crispy side / Small slice
. Press "Favourite" button for 3 seconds
. You will hear a beep sound with LED blinking 2
times indicating the setting has been recorded
3
) crispy side" and/
). [8]