Publicidad
Idiomas disponibles
Idiomas disponibles
(Up): return to previous information (in main mode), + button (in programming mode).
(Down): transition to the next information (in main mode), − button (in programming mode).
(Left): return to the previous segment, return to the main menu (in setup mode).
(Right): move to next segment, move to submenu (in setup mode).
Programming mode
The screen is divided into 10 segments, with a message display panel at the bottom.
There are six program modes: main mode, setup mode, history mode, alert mode, maximum/minimum mode,
and calibration mode.
Press HISTORY or wait 30 seconds to exit programming mode.
If there are multiple parameters in a segment, press SET to cycle through the different parameters. For
example, if the current section is RAIN, you can press SET to switch the parameter display (rain speed, rain
event, day, week, month, year, total).
Quick display mode
In the main mode, press
will be marked with the arrow symbol
message panel at the bottom.
The 11 characters on the left are used to display text, the numbers are displayed on the right. If there
are multiple messages, they will change every 5 seconds, or you can click
switch to a different message. When an alert is triggered, a corresponding message will be displayed here.
Time and date
This segment displays the current time and date. When connected to Wi-Fi, the time will be synchronized with
Internet time (UTC). If there is a
connected to Wi-Fi, the time will be synchronized with Internet time (UTC). If there is a symbol in this
segment of the screen, the information panel displays the following data: year and day of the week, time
the alert was triggered and its status (ON/OFF), moon phase.
Solar irradiance and UV index
The solar irradiance index (left) represents the total intensity of sunlight, the theoretical maximum of which
varies depending on location and time of year. The actual value also depends on atmospheric conditions
(clouds, humidity, etc.) and changes throughout the day.
The UV Index (right) is a value that indicates the strength of harmful UV radiation.
If there is a
symbol in this segment, the message panel displays the following time-stamped data:
the maximum light intensity for the day, the maximum light intensity since the last reset, the maximum UV
index for the day, the maximum UV index since the last reset.
Indoor temperature and humidity
This segment displays the current room temperature and humidity at the console location. If there is a
symbol in this segment, the message panel displays the following time-stamped data: maximum and minimum
indoor temperature for the current day, maximum and minimum indoor temperature since the last reset,
maximum and minimum indoor humidity for the current day, maximum and minimum indoor humidity since
the last reset.
(Left) or
(Right) to switch between different segments. The selected segment
. The selected segment also determines the messages displayed on the
symbol in this segment, it displays the current time and date. When
(Up) or
11
(Down) to manually
Publicidad
