Fulgor Milano SOFIA 30" Instrucciones Para La Instalación página 21

Replace Injector (griddle)
1. Remove griddle plate.
2. Remove burner cover.
3. Remove the burner fixing screw (1).
4. Remove the springs (2) from thermocouple and ignitor to
shift the burner.
5. Remove injector (A) by using a 9-32" (7mm) nut driver
counter clockwise.
6. Install the injector supplied with this appliance. The injector
has small numbers stamped on the side, this number
corresponds with the orifice diameter.
7. Turn clockwise to tighten (tighten to a torque of 15 to 20
inch-lbs.)
8. Replace all parts following the reverse order.
9. Save the injectors removed from the appliances for future
use.
EXPLODED VIEW OF BURNER
1
6 - Conversion for LP or NG Gas
Replace injector on (oven lower burner)
1. Remove the burner covers plate.
2. Remove the screw securing the oven burner and withdraw
the burner from the support.
A
EN
17