Publicidad
Idiomas disponibles
Idiomas disponibles
m Installing the Belt Clip
If necessary, attach the belt
clip using the two supplied
3 x 8mm screws.
Note: If the belt clip is not installed,
its mounting location may get hot
during continuous transmission or
when left sitting in a hot
environment.
If you are not using an
optional speaker/
microphone, install the
cover over the SP/MIC
jacks using the supplied
3 x 6mm screw.
1
Insert the speaker/
microphone plugs into
the SP/MIC jacks.
2
Install the speaker/
microphone locking
bracket over the plugs
using the supplied
3 x 6mm screw.
ase
ante
NC
ts
aS
ee
S i
Publicidad
