Publicidad
Idiomas disponibles
Idiomas disponibles
12
INSTALLATION
Choosing the Proper Location
Install the washing machine on a solid floor that is
strong and rigid enough to support the weight of the
washing machine, even when fully loaded, without
flexing or bouncing. If the floor has too much flex,
you may need to reinforce it to make it more rigid. If
the floor is not solid, it may cause severe vibration
and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth ground.
2
Two or more people are needed for moving and
unpacking the washing machine.
3
Allow for sufficient space between the walls and
the washing machine for installation.
Space Requirements
You must allow sufficient space for water lines, the
drain line, and airflow.
NOTE
y Be sure to allow for wall, door, or floor moldings
that may increase the required clearances.
Clearances
25.8"
(65.5 cm)
32.9"
(83.5 cm)
58.7"
(149 cm)
0.2"
(0.5 cm)
40.8"
(103.5 cm)
1"
(2.5 cm)
1"
(2.5 cm)
4"
29"
1"
(10 cm)
(73.7 cm)
(2.5 cm)
29"
1"
(73.7 cm)
(2.5 cm)
0.2"
(0.5 cm)
1"
(2.5 cm)
Publicidad
