28
OPERATION
Setting Options During Cycle
You can add the desired options during the wash
cycle.
Child Lock
This feature locks the controls to prevent children or
others from changing the cycle settings by pressing
the buttons during the cycle. The feature does not
lock the door.
Enabling Child Lock
Press and hold
cycle.
- When Child Lock is enabled, a N message and the
remaining wash time are displayed, in turn, on the
display panel of the washing machine.
Disabling Child Lock
Press and hold
cycle.
NOTE
Once the washer has shut off, the Power button
y
allows the machine to be turned on, but the
controls are still locked. Press and hold the
Rinse + Spin button for 3 seconds to disable
Child Lock.
for 3 seconds during the wash
for 3 seconds during the wash
Add Garments
Use this function to add garments or remove foreign
objects like coins or keys after the cycle has started.
1
Press
. The cycle pauses and the door
unlocks.
2
Open the door, add garments or remove foreign
objects, and close the door.
C
3
Press
to restart the cycle. The cycle continues
automatically.
NOTE
After checking the water level/temperature
y
conditions for safety, the door unlocks once the
wash movement has stopped . (Door Lock LED
turns off.)
- This may take several seconds depending on
the water level. When a lot of water is in the
tub, the door unlocks after water drains to a
safe level.
- If the temperature in the tub is higher than
113°F (45°C), a short warning chime sounds
and Add Garments is NOT allowed for safety.
Add Garments is disabled during the Tub Clean
y
cycle for safety.
y To preserve wash performance, wash time may
be extended depending on when garments are
added to a cycle.
WARNING
y Be careful when opening the door as wet laundry
may drip or fall out when the door is opened.
y Do not attempt to force the door to open when
locked. Doing so could result in damage to the
machine, malfunction, or personal injury.
y Make sure the area around the door seal is clear
before closing the door. If laundry gets caught
between the door and the seal, it can damage the
rubber gasket and may result in leaking.