GE ESH22XGPACC Manual Del Propietario E Instalación página 7

About the controls on the refrigerator.
Your controls will look like one of the following:
5 5
9 IS COLDEST 0 IS OFF
FREEZER FRESH FOOD
6
FREEZER
5
Startup Steps for Proper Temperature Control
STEP 1—Set Fresh Food Control on "5."
STEP 2—Set Freezer Control on "5."
STEP 3—WAIT 12 HOURS for temperature to stabilize.
STEP 4—If a change is needed, move the control one number at a time and allow 12 hours
for temperature to stabilize.
NOTE: Setting the controls to the 0 (off) position does not remove power to the light circuit.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
To Change Temperature Control Setting with Touch Pads:
• Freezer setting is on the left side of the display.
• Fresh Food setting is on the right side of the display.
— Press the warmer or colder pad for compartment and direction desired.
— Present control setting number will illuminate.
— Each time the pad is touched, compartment setting changes one number.
A display of 1 is warmest and 9 is the coldest setting.
NOTE: Setting the controls to the 0 (off) position does not remove power to the light circuit.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
REFRIGERATOR
5
0 IS OFF
9 IS COLDEST
9 IS COLDEST
0 IS OFF