TECshow MAGIC CUBE Manual De Usuario página 4

2. SAFETY
Any person involved with the installation, operation and maintenance of this device has to:
• be qualified
• follow carefully the instructions of this manual
3. INTRODUCTION
Thank you for having chosen this professional mov-
ing head. You will see you have acquired a powerful
and versatile device. Unpack the device. Inside the
carton box you should find:
a. Moving Head 1 unit
b. Signal Cable 1 pc
c. Power Cable 1 pc
d. User Manual 1 unit
e. Fasten Lock/Quick Couplers 1 pair
(Flight case, Safety cable and Clamps are optional,
please contact your dealer)
Please check carefully that there is no damage
caused by transportation. Should there be any
problem, please consult your dealer and don't
install this device.
P. 4
Tecshow Magic Cube |
English version
CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Unplug mains lead before opening the housing.
Installation
Before installation, please read the user manual
carefully, then prepare Fasten Lock (2 pcs), Clamps
(2 pcs), and Safety Rope (1 pc).
1. Upward the moving beam bottom, use 2 pcs
Fasten Lock tighten at bottom of moving beam.
Check it again.
2. Hang up the fixture on the truss by clamps,
tighten according to the truss diameter.
3. Use the safety Rope tighten for safety issue.