Descargar Imprimir esta página

FLORABEST FTHSA 20 B2 Traduccion Del Manual De Instrucciones Originale página 33

Cortasetos telescópico recargable

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
of use.
Only charge with the originally sup-
plied charger.
If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to
be replaced. Only use an OEM spare
Service.
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information.
The warranty excludes all defects
caused by improper handling.
Used batteries
If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to be
replaced. Only use an OEM battery
pack replacement available from our
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
tenance").
Checking the charge status
of the rechargeable battery
The battery charge status indicator (
signalises the state of charge of the battery
(
17).
Press the button (
17). The state of charge of the battery is
displayed by illuminating the 3-colour LED
lights of the state of charge display.
16) on the battery (
3 LEDs light up: Battery is fully charged.
2 LEDs light up: Battery has a residual
1 LED lights up: Battery has to be charged.
Recharging the battery
Only charge the battery (
the red LED on the charge status in-
dicator (
1.
Remove the battery (17) from the
C
appliance, as necessary (see „Re-
moving/inserting the battery").
2.
Insert the battery (17) in the
charging compartment of the bat-
tery charger (15).
3.
Plug the battery charger (15) into
a mains outlet.
The red LED on the control dis-
play (14) of the charger (15)
comes on when the battery (17)
is loading. If the green LED on
the charger (15) is on, the battery
(17) is charged.
4.
When the battery is fully re-
-
charged unplug the battery
charger (15) from the mains.
5.
Remove the battery (17) from the
charger (15).
Assembling
19)
Remove the rechargeable bat-
tery from the device before
assembly. Insert the recharge-
able battery only once the de-
vice is completely assembled.
There is a risk of injury!
Use only original parts.
G B
charge.
19) is on.
1 hour.
I E
17)when
3 3

Publicidad

loading

Este manual también es adecuado para:

291776