Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Installation
Television Location
This unit is intended to be used with an optional stand (TY-275F25M) or
entertainment center. Consult your dealer for available options.
□ Avoid excessive sunlight or bright lights, including reflections.
□
Keep away from excessive heat or moisture. Inadequate ventilation may cause
internal component failure.
□
Fluorescent lighting may reduce Remote Control transmitting range.
□
Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best
results:
□
Use 75-ohm coaxial shielded cables.
□
Check type of output and input connectors on your components.
□
Determine required cable lengths.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC
ADAPTOR CONNECTOR MAY BE NECESSARY.
Polarized plug
Cable / Antenna
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company.
Note:
A cable converter box may be required for proper reception.
Check with your local Cable company for compatibility
requirements.
Antenna Connection
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
For proper reception of VHF/UHF channels, an external antenna is
required. For best reception an outdoor antenna is recommended.
Antenna must be set to TV mode in the SET UP menu.
incoming cable from
Home Antenna
Cab/e
Preset
Cable
Mode
is
preset
at
the
factory.
Antenna users must change to TV Mode in
the
Set
Up
Menu
under
Prog.
Chan
(Program Channels).
0
Publicidad
