Publicidad
Idiomas disponibles
Idiomas disponibles
Picture In Picture (PIP) Operation
With a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source
(VCR) is required to provide a second picture.
Connect your television to a VCR, as shown.
CABLES NOT SUPPLIED
Note:
The Remote Control must be programmed with the supplied codes to operate the
VCR.
See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Turn the VCR off and tune the TV to Channel 3 or 4, depending on the
VCR.
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note:
The PIP picture is the same as the Main picture, initially.
•
Press the TV/VIDEO button on the Remote Control to select the VIDEO
PIP source.
•
Press the VCR button on the Remote Control and turn the VCR on.
•
Press the TV/VCR button on the Remote Control.
•
Choose channels for PIP frame by pressing VCR CHANNEL up/down
buttons on the Remote Control.
•
Choose channels for the Main Picture by pressing the TV button on the
Remote Control and using the numeric keypad or CH up/down buttons.
\'
I
V
^
SWAP Button
\l' •
The
SWAP
button switches the PIP and Main
Picture source. Press the
RECALL
button for PiP
and Main Picture source status, on screen.
Publicidad
