Panasonic SuperFlat CT-27SF25 Instrucciones De Operación página 7

Picture In Picture
{PIP)
Operation
Picture In Picture (PIP) Operation
With a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source
(VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
TERMINALS ON BACK OF TV VCR
Note:
The Remote Control must be programmed with supplied codes to operate the VCR
and Cable Box. See Programming the Remote Control in the
Remote Control Quick
Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
• Press the TV/VIDEO button on the Remote Control to select the video
PIP source.
• Verify the CABLE BOX and VCR are turned on and the VCR tuned to
Channel 3 or 4,depending on the VCR.
• Choose channels for the PIP frame by pressing the CBL button on the
Remote Control and using the numeric keypad or CH up/down buttons.
• Choose channels for the Main Picture by pressing the TV button on the
Remote Control and using the numeric keypad or CH up/down buttons.
V •
SWAP Button
The
SWAP
button switches the PIP and Main
Picture source. Press the
RECALL button
for PIP
and Main Picture source status, on screen.