Merach MR-R14 Manual Del Usuario página 12

Step 2: Installation of rail connection plate
Take out the rail connection plate(05), then lock the 4 hexagon socket flat head screws(74)
through the holes on the foot plate(04), left and right rear rail assemblies(B/C) into the
corresponding pre-built nuts on the rail connection plate(05), and then lock the 4 hexagon
socket flat head screws(74) tightly with the Allen wrench(102).
#74: hexagon socket flat head screws M6×50×S4 *4
#102: Allen wrench S4 25×60×4 S4 *1
EN
Assembly Instruction
009